Torque Rolling Q
 

I have a profile plane that is a bit hard to get to Torque Roll, it will do it slowly if you hold it vertical and kind of fish for just the right vertical attitude but it is not easy to get going or to keep it going....
Looking for help as to what I might do to make it better to Torque Roll.

WRK

RE: Torque Rolling Q
 

an engine with more tourque?

RE: Torque Rolling Q
 

Not necessarily so !

I have a 12.75 profile with a da50 and still sometimes it gets stuck !

try leaning it a couple of degrees on it's back rather than straight up this may help, but you must keep it slightly on it's back during the entire rotation....

RE: Torque Rolling Q
 

You can also work the throttle a little bit if your not already.

David

RE: Torque Rolling Q
 

http://www.rcuniverse.com/magazine/a...article_id=238

RE: Torque Rolling Q
 

Pitch it ever soo slightly on its back. Also slight loss of altitude makes it swing around good. Keep the wings level, and make sure you keep that tail under at all times, sometimes you need to bump the elevator too keep it vertical.

I love torque rolls. They are addictive.