xp9303 help
 

hey there im new to giant scale 3D and i need help with how to set up dual elevator servos, i have them set up so one side is in the elevator spot and the other is in aux three. the problem i am having is getting the expo and dual rates to work on bolth sides, i have it set up in the programable mix and i cant get those things to work on bolth sides. so if anybody has any answers i would appericate it very much. thanks

RE: xp9303 help
 

I use aux 2 and then you don't have to set up any mixing

RE: xp9303 help
 

To expand on what David says here. I'm also using Aux 2 for the left aileron. Then go to the wing type screen and mate "Elev" with Aux 2. (Make sure you have the "Aux 2" switch inhibited). When you go to the "DR & EXP" and "REV SW" and "SUB TRIM" screens you will now notice that instead of seeing "AUX 2", it will say "LELE". Pretty neat it think. Also, as David says you don't need to mix anything.

Jim

RE: xp9303 help
 

thanks for the help and i am going to try that right now.

RE: xp9303 help
 

Let us know how it works out. The more I use my 9303, the more I like it.

Jim

RE: xp9303 help
 

wow thats all it was, it works perfectly and that is very true the more i use it the more i like it.