Howemd

I am looking for a good 3D foam plane for down low practice and was looking at your Katana, Super Xtra and Super Cap. The spare motors I have in my parts box are a Axi 2212/26, Axi 2212/34, Eflight 400, and Hacker 20-20L. What would be a good plane for one of these motors (as far as best for 3D practice)?

Thanks in advance.
Dave.

cliorc

Here is one that is very durable.http://www.ohiomodelplanes.com/comer...?idCategory=38 The OMP/Copperhead Extra Stiffy and Yak Stiffy.Here is a video I did last weekend of the Yak.Olin http://www.youtube.com/watch?v=Ff7kzX1TEhQ

JohnVH

My Feedback: (38)

Hi Dave,
I use the 20-20l hacker, a buddy uses the eflight400, these two motors will rock the supers and the lighter pro models.. They are all good for 3D practice, that is why they were designed, and they all fly well, so it will be personal preference. The other motors you listed I have not had in person..

playntraffic

www.dwfoamies.com

Get the Yak 54. Perfect for your 2212/26. Use a 3s battery around 1300ma and you should be set. Best torque rolling foamie that I have flown.

Another good choice is the Charger RC CR-1.