RCU Forums - View Single Post - Newbie Volcano help
View Single Post
Old 03-30-2006 | 03:59 PM
  #5  
tekguy4
Junior Member
 
Joined: Mar 2006
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
From: East Longmeadow, MA
Default RE: Newbie Volcano help

I adjusted servos so throttle was in a neutral position, then it was idling way to high so I turned back idle screw just un till tires stoped moving,
it was spitting alot of fuel so I leaned it a tiny bit (t was still spitting fuel) then it ran great and I kept the throtlle down (didnt rev it out)

Now wont restart (I think the Igniter may be flaky) but any other suggestion would be appreciated