RCU Forums - View Single Post - knife edge spin - entry and input
View Single Post
Old 06-22-2006 | 01:37 PM
  #3  
daveopam's Avatar
daveopam
My Feedback: (9)
 
Joined: Oct 2002
Posts: 7,810
Received 43 Likes on 38 Posts
From: ELK CITY, OK
Default RE: knife edge spin - entry and input

I have had the best luck by setting up for a hammer head(stall turn). Half way through I add full down, opposite rudder and 1/4 throttle. timing is everything. I have one plane that will go in by adding full power and spoilerons to a flat spin. Only one will do it that way though.

David