Brass rails and RF interference
Looking for anyone with experience using brass for sliding rail mechanisms such as sliding canopies. Metal to metal contact with potential for vibration is a big no-no due to the RF interference caused. But, it appears that many are using brass when constructing sliding mechanisms in RC aircraft.
Brass is non-ferrous, so technically, it makes sense that it would not cause electro-magnetic resonance fields resulting in RF interference like ferrous metals can. But, I'd like to find someone with experience using brass on brass in such a way. RF problems in your experience?
I'm not doing a sliding canopy at this time, but have another sliding mechanism I want to use a brass tube inside a brass tube for. Want to be sure I'm not going to run into RF issues.
Thanks!
Tom