RCU Forums - View Single Post - problems taking off with training gear
Thread: problems taking off with training gear
View Single Post
Old 11-11-2006 | 07:59 PM
  #3  
DVI
Senior Member
 
Joined: Apr 2004
Posts: 365
Likes: 0
Received 0 Likes on 0 Posts
From: Burlington, NC
Default RE: problems taking off with training gear
If you are using the training gear, Do not use the idle up mode. Increase your blade pitch one turn at a time until you can lift off at about 3/4 throttle.
DVI is offline  
Reply Like