RCU Forums - View Single Post - Servo Buzz
Thread: Servo Buzz
View Single Post
Old 01-25-2007, 10:30 AM
  #4  
MadScientist
Senior Member
 
Join Date: Jun 2003
Location: Kissimmee, FL
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Servo Buzz

I agree. Disconnect the servo from the push rod and see if the buzzing sound goes away. It should. Try to free up the linkage so the flap goes up and down very easily, and then reattach. If you still hear buzzing, see if you hear it only at full throw of the servo, and adjust as necessary.