I have built entire models (lately) with Titebond II and epoxy only to glass the wing saddle and thinned as fuelproofing. CA is handy for wings and hinges but not necessary. I got into the habit of flexing every rib when doing a wing with CA and I find many that did not bond well with thin CA. I still don't fully trust it. I love CA Gel but it is pricey.

Wood glue takes a long time to dry, but excess/spills can be wiped up with a wet rag or finger and the parts can be worked into position for a long time. I prefer Titebond II unless I have a specific reason to use something else.

Back in the 70's and 80's it was Duco cement for everything and dope for any fuelproofing. Anyone remember Duco Cement? Talk about hard to sand.