hello everyone just been sitting there , had a thought , was having a drink from a bottle of water an suddenly got an idea of cutting the bottle in to strips , so you end up with hoops , the hoops then fit over the tyres and are held in place with the grip of the rubber tyre , instant drift tyres , there awesome , the first pic the tyre looks stock because the bottle being obviously clear , so i took the second to show the tyre beneath the outer piece of bottle have a go at making them yourselves an let me know how they work for you , another tip if your bottle has a label glued to it , use a small amount of lighter fluid to remove it along with any glue residue