I was looking to do the same on pdf. I ended up using Micrsoft Works then copy -n- pasted all the posts by RCKen regarding the build. It came up to 99 pages (printed out in library for $10 [:@] ) but it was worth it. I am building a LT-40 and using RCKens build posts/thread as a guide. Of coarse I added a bibiliography of where i got it and put down RCKen as the Author (just to be safe to avoid any plagerism).
If there is a easier way to fit all his build posts into fewer pages please let me know. Until then I will keep reading the 99 pages multiple times (not that bad if dedicated to reading 99 pages!! ).

Thanks For this thread, it has helped me out greatly (since this is my first kit build) as well as others

And if i did anything bad or wrong by copy and pasting onto works let me know (again to avoid plagerism ).