RE: Bob Cat Copy Falcon 120 Jet
Hi guys, First flight was UGLY. GMS 120 with the 14x7 three blade is not enough, needs more blade to start with. RPM'S in the air were verry high but no push. Take off took for ever and then shot straight up , landing after cutting power went straight down. I found out on second flight both problems were better wih at least half flaps. For you guy's with JR radios down load BVM data safe program for BOB CAT it will give you basic set up and crow. Next step will be to replace GMS 120 with OS 160, Already ordered pusher pipe from WESTON UK.