View Single Post
Old 03-27-2003, 03:55 AM
  #7  
Wyo_Flyer
Member
My Feedback: (1)
 
Join Date: Jan 2002
Location: Laramie, WY
Posts: 41
Likes: 0
Received 0 Likes on 0 Posts
Default Moki 2.1 and Tru-Turn Spinner.

Hello All
On my Moki 2.1 the adapter is 1/2" O.D. where it goes through the prop. I drilled the front side of my prop to 1/2", about 1/2 way through and left it at 12 mm on the back side. This gives the adapter more thread engagement.
Hope this helps.