Correct setting for A123 (LiFePO4 cells would be
LiFe
Vultage level: 3.3V/cell
Max.charge vultage: 3.6V/cell
it also has a program for LiFE which only charges to 3.3v though.
That is not max. charge to but base(nonimal) voltage just like 3.7 is base(nonimal) voltage for LiPoly.
Cells should charge to 3.6 each and be approx. 3.45 a few minutes after charge is completed.
It is best to charge at 1C,then 2C then 3C when new.
Charles