RCU Forums - View Single Post - Dual brushless ESC setup
View Single Post
Old 11-26-2008, 07:47 AM
  #18  
paul daniel
 
Join Date: Sep 2006
Location: Pewaukee, WI, ALBANIA
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Dual brushless ESC setup

Hi Guys: I read about the two ESC's and have yet another question. I have GWS A-10 with the 55 fans and have two E-flight 400 brushless motors. I am using two 40 amp ESC's that I got from Hobby King and a 2000 mAh battery. I have disabled the red wire on one of the ESC's. What happens is that the motors run up to about 3/4 throttle and the left one starts to slow down on me. I'm good on amps and have checked it with an amp meter. I have tried switching disabling the other ESC and that doesn't seem to make things better. I have run both fan units separate and they are fine. Suggestions?
Paul