RE: Walkera 60B issues
Normally I center all except the throttle, its always down. I always turn the TX on before plugging in the Heli. I dont know why it threw the linkage, it only did it once and hasn't done it since, when it happened I wasn't flying or hovering, just raising the RPM's to get a feel of what it was going to do just before flight. I am really green. I have flown the Micro mini's but I know thats nothing compared to these.
Yes when I power the TX on and plug in the battery it binds and then allows me to move the servos but, the front one keeps making noise and pushing up, and the throttle control lever also moves the servos just a little, and does not spin the motor for the blades. I will move the front servo to a different port but, what about the throttle not spinning the rotor? well, let me disconnect the servos and re-port the front and then we'll see how its acting. Thanks all.