so i have seen a few videos of people balancing two bladed props but i have yet to see one of a three blader, i could use a little bit of help with the three bladers, i dont quite understand how to static or dimensionally balance them, all i have for balancing is a top flite balancer which to my understanding is very acurate, ive gotten to the point where i can stop either one of the three blades at the top but if i leave it to spin it doesnt just stop it will rock back and forth for a little bit and then finally settle but not always on the same position, a video of what a balanced 3 blade prop looks like on a balancer would be of the most help to me if anybody has one or could make one</p>