Well it's finished except for painting the cowl. Covered with 21st century painted fabric(heavy) YS63 up front with a13/6APC, a brace nut AND brass spinner nut. It weights 5lbs8oz. Put it on the CG machine and it will take 12 oz on the mount beams to balance. 6lbs 4 oz, 24.6oz/sq.ft. Not real good but not real ugly. I put a little less than 1 deg pos. inc. in the uper wing with a 5/32 block under the forward strut. Well fly(attempt) in a week or two.