Evolution GX26 Choke Question - Help!
Hi All,
Probably a stupid question, but here goes. Just fitted an Evo 26GX which has a spring loaded throttle. Once choke is applied, as you raise the throttle, the choke is automatically released.
The obvious problem Ihave is on closed throttle, the minute Itry and apply choke, it trys to open the throttle servo, so at this point, the throttle servo gets very upset as the choke is manually trying to advance the throttle servo without any radio input.
I am operating the choke manually via a rod.
Am i missing something obvious?
All suggestions welcome!
Thanks
Paul