RCU Forums - View Single Post - Help - New to brushless
View Single Post
Old 06-25-2010, 02:51 AM
nick_75au's Avatar
Join Date: Aug 2006
Location: BrisbaneQLD, AUSTRALIA
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Help - New to brushless

Im not an FE guy but they do run at 30-35000 RPM on surface drive, If your boat is not surface drive I would drop that figure down somewhat.

Your figures are spot on. Some more details of the boat would help in sorting out a good set-up. Props would be around the 35-45mm size, but some experimenting with the inexpensive plastic carbon props will help to find best one.