What do you recommend?
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: Flatwoods, KY
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
What do you recommend?
Just finished up 550 Hex copter with the Vector controller and want to install a FPV system in it.
Should I install separate components TX, RX, video monitor etc. or is it better to start out with a complete system, like the Fat Shark Attitude, that is more plug and play?
I will be flying only to the limits of my transmitter (DSMX) so extreme range is not a factor.
I might want to upgrade later with a ground station and better antennas but don't have any further upgrades is mind.
Thanks for the inputs.
Mike
Should I install separate components TX, RX, video monitor etc. or is it better to start out with a complete system, like the Fat Shark Attitude, that is more plug and play?
I will be flying only to the limits of my transmitter (DSMX) so extreme range is not a factor.
I might want to upgrade later with a ground station and better antennas but don't have any further upgrades is mind.
Thanks for the inputs.
Mike