Aerowroks 20cc trainer
 

Hey Guys, just wondering when the new 20cc trainer will be available?...saw the announcement from Toledo and it looks like a great first gas/large aircraft...

We have just posted the new GT Trainer on our web site and the first shipment will arrive late September mid October

Thank You

Great!...thanks for the quick reply...

ouch, 50 bucks for wheel pants

When we can see video of test flight?

Hello,

We have not had the opportunity to make a video of the Trainer yet but will work on it as soon as possible. Living in Colorado we are expecting cold weather and snow very soon.

Thank You
Rocco

received my GT Trainer on tuesday and flew it sunday with the dle 20. figured the 20 would be plenty of power as i have one in the Topflite 182 cessna and it weighs 12 lbs. very impressed with the GT's performance much more aerodynamic than the 80" Kadet {inverted flight} hops off the ground in approx 10" on 2+" tall grass. went together with no modification other than the addendum that came with the box. after returning home -discovered that when fuel vents out f the tank vent { located under the fuselage and beside the lower hatch} it will wick into the seams of the hatch and soaks into the wood. relocated vent line back through firewall and exited cowl down by the nose gear extending approx 1.5". should cure the problem. handle the wind well. only a slight elevator trim adjustment first flight.

That’s great news thank you for your update. If you have pictures we would love to see them.

Thank You
Rocco

see photos next frame

here are a few pic rocco

http://www.rcuniverse.com/forum/atta...mentid=1930148http://www.rcuniverse.com/forum/atta...mentid=1930149http://www.rcuniverse.com/forum/atta...mentid=1930150http://www.rcuniverse.com/forum/atta...mentid=1930151http://www.rcuniverse.com/forum/atta...mentid=1930152

I was not able to view the photos?...

Rocco

send me your e-mail to [email protected] and i'll send via e=mail

GT Trainer
 

Nice plane. I plan to get one. will a DLE35RA fit in this plane?

Barry,

No because the plane has a tricycle type of gear the muffler on the 35RA will interfere with the nose wheel steering.

We have been flying ours with the DLE 30cc and it has more then enough power

Thanks
Rocco

I've flown 3 flights with the dle20cc last sunday {maiden flight} and I am very satisfied with the performance. it only weighed in at 12.4 pounds and performs all the maneuvers you would expect it to do with ease at 1/2 throttle. hammer heads, Cuban eights, figure eights, immelmann, inside loops, split S, spins, rolls. I contemplated the 30cc in considering the weight of the GT, but like I said above about having a dle 20 in the topflite Cessna 182 {12lbs}, also I have a Curtiss P-6e Hawk{76"}, Taylor Craft{80"} and seagull Yak 55M {69"} with the DLE 30 in them. they both weigh in at 16+ pounds and the yak at 14.8lbs. I feel I made the right choice in the choosing the DLE 20cc for the GT. my back ground as a modeler goes back 50+ years with 40 in R/C.

I'm almost finished with mine. Thanks for the tip on the gas vent.
Was your CG close to the instructions or did you have to shift some weight around ?

Roco,

Please advise where i can get sizes of GT trainer's box?
I like to find another way of shipment t o Russia.

balance was right on the money using an EP BUDDY A123 2300ma battery from Buddyrc/com. I used the 3/5" wheels on the main and the 3" on the nose with the pants. will need to open the opening on the main pants for the 3.5" wheels to fit.

http://www.buddyrc.com/media/catalog...x_700pix_1.JPG

Thank yo so much!

Best regards

Boris

Ive been out the hobby for quite some time now, getting back into it. This plane seems to be my ticket. Ive had several Aeroworks planes in the past so I know what kinda quality you get. Im glad to hear it flew good with the DLE-20, I believe im gonna go that route. Please post your findings and pics if you can guys thanks. Rocco im calling up there the first part of next week and ordering this plane and DLE-20 together!!!

We are expect any video of flight this trainer looking for.

Rocco,

Please advise is nose gear metal damper supplying in ARF GT trainer?

See your picture from site

http://www.rcuniverse.com/forum/atta...mentid=1935667