Mamba 70cc
 

This Mamba is in excellent condition with no damage or hard landings whatsoever. It has a DA-70 in it that runs perfect and has a canister exhaust so sounds great and there are no holes in the cowling. The power is ballistic and it will fly 10-15 min on a tank. I used only high quality materials and components in the build and added some custom features like carbon fiber in in the fuselage for good looks, and custom made clips for the wing strut pins to eliminate the need for tape and speed assembly. I also ran all wiring neatly and inside sheathing to make this one of the cleanest airframes you'll find. Despite these extras and the cannister exhaust, careful attention to weight makes this Mamba weigh in at 20.5lbs ready to fly, right at the weight in the specs. The asking price is less than 1/2 what it costs to build the plane. Here's what's in it and the cost:

Airframe - $1250
DA-70 - $860
2 in 1 header - $160
MTW Cannister - $175
3D printed engine cooling baffles - $100
MKS 1220 HV Servos (2 elevator) - $202
MKS 777A+ Servo (1 rudder) - $109
Flex 41611BLHV Servos (4 ailerons) - $600
5" CF spinner - $105
CF Falcon Prop - $67
Aluminum servo arms, fuel tank, ign battery, extensions, etc. - $180
Total = $3,810 (this doesn't include tax or shipping for components)

I'll include the Spektrum 2300 mah ignition battery, but the Jeti receiver/central box, and receiver batteries are not included. Local pickup only, too big to ship. $1,800
https://cimg4.ibsrv.net/gimg/www.rcu...649e750edd.jpg
https://cimg6.ibsrv.net/gimg/www.rcu...10ddb50ac4.jpg
https://cimg7.ibsrv.net/gimg/www.rcu...1768a4c8d3.jpg
https://cimg8.ibsrv.net/gimg/www.rcu...8f2161722e.jpg
https://cimg9.ibsrv.net/gimg/www.rcu...17487b3d6a.jpg
https://cimg0.ibsrv.net/gimg/www.rcu...14b23799e0.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...c57d5b19bc.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...9c3e7f02ae.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...cc86b6e146.jpg

Sale pending