RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Airtronics Support Forum (https://www.rcuniverse.com/forum/airtronics-support-forum-516/)
-   -   RDS8000 wont bind with RX-500's (https://www.rcuniverse.com/forum/airtronics-support-forum-516/11574489-rds8000-wont-bind-rx-500s.html)

skeeter_ca 07-19-2013 03:44 PM

RDS8000 wont bind with RX-500's
 
I bought two new RX-500 receivers from Hobbypeople with their 4th of july sale. I can't get either one to bind. I do just like the book says and it looks like it's binding but then nothing. I can put my old 8 channel receiver back in the plane and it works great. What am I missing here?

skeeter

mschulz531 07-19-2013 04:13 PM

RE: RDS8000 wont bind with RX-500's
 
Check the power pins on the RX, IIRC this might be the one RX where the pins are in the "wrong" order
try reversing the orientation of the power connector and try again?

skeeter_ca 07-19-2013 05:32 PM

RE: RDS8000 wont bind with RX-500's
 
The connector does go in the wrong way but then nothing happens. When I put it back the original way the light lights up when it is turned on. During the binding process the light flashes like it says in the manual but then there is no servo control.

skeeter

skeeter_ca 07-21-2013 04:57 PM

RE: RDS8000 wont bind with RX-500's
 
Well schulz, you almost had it right. It wasn't the power pins. It was the servo connectors. I had all of them reversed. I thought I had all of them the right direction but they were backwards. I turned them all yellow lead up and it's working great. I took it down to hobby people just to see if they had any ideas and when the first guy couldn't figure it out he called in a second one and he noticed the connectors in backwards right away. Thumbs up to HobbyPeople.

skeeter

mschulz531 07-22-2013 05:49 AM

RE: RDS8000 wont bind with RX-500's
 
skeeter, glad you got it figured out! Nice that you could visit the local shop and get their help; a second pair (or third pair) of eyes always helps!
<br type="_moz" />


All times are GMT -8. The time now is 01:35 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.