RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Airtronics Support Forum (https://www.rcuniverse.com/forum/airtronics-support-forum-516/)
-   -   Trouble binding radio (https://www.rcuniverse.com/forum/airtronics-support-forum-516/9982166-trouble-binding-radio.html)

Aerobatx 09-05-2010 03:31 PM

Trouble binding radio
I've had some medical probems...and haven't been able to fly for 3 months, when I got my stuff out to go flying this weekend, I couldn't get anything to bind on my system. I have a brand new 92824 Rx., the Rx, of the same type that was in the stick I had flown before with. and a Rx that is in a U Can Do that worked fine the last time I went flying. NONE of them will work now ....

I got out te intsrtuction book and after multiple tries, and fully recharging eveything I still can;t get anything to bind. Turn the Tx on, Turn the Rx on while holding the Rx button down, it flashes slowly, release and push the Tx bind button, and mine continues flashing slowly until it finally goes out.

Any ideas on whats wrong, or is it just time for a service call?

ArchNemesis 09-05-2010 06:59 PM

RE: Trouble binding radio
Likely a service call, but what TX are you using?

Aerobatx 09-06-2010 03:24 PM

RE: Trouble binding radio
I'm using the RDS8000. It's always given me perfect operations.

TMooreATX 09-07-2010 12:19 AM

RE: Trouble binding radio
Send it back. The RF deck might need to be replaced.


ChrisVerano 09-07-2010 05:37 PM

RE: Trouble binding radio
Send the transmitter in. It may just need the binding software to be reprogrammed.

All times are GMT -8. The time now is 09:43 PM.

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.