Pegasus HPES clutch
Hello all.
My Pegasus HPES has a problem with the clutch slipping(worn "O" ring?), so I have tried to remove the front cowl as per the instructions, but it will not come off. Any suggestions? Best regards, Frank. |
RE: Pegasus HPES clutch
I still cannot remove the front spun aluminium cowling, can somebody at AMT Netherlands please assist!
Thank you. Frank Laguda |
RE: Pegasus HPES clutch
Take a plastic or wooden dowl and a soft mallet and tap very lightly on the nose cowl to remove it. After a period of time, they become lodged in place. It is a very close tolerance, so be extremely careful! The same diligence applies to replacing the starter O-ring.
|
RE: Pegasus HPES clutch
Thank you for your response Mark.
When you say tap lightly with a "malet and plastic/wooden dowel", which part of the cowl do I target and in what direction? It is proving to be quite a headache! Thank you for your response, Frank. |
RE: Pegasus HPES clutch
Thank you for your help, got it sorted last night.
Best regards, Frank. |
All times are GMT -8. The time now is 08:58 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.