Great Planes new Escapade for DLE 30cc?
#201

My Feedback: (2)
Join Date: Dec 2007
Location: Fort McMurray,
AB, CANADA
Posts: 4,119
Received 0 Likes
on
0 Posts

A couple more weeks and it should be all green again for the summer like in my avatar. It looks like nice weather in the pictures but it was pretty cool out today. I was wearing a sweater as well as a leather jacket.
#204

My Feedback: (2)
Join Date: Dec 2007
Location: Fort McMurray,
AB, CANADA
Posts: 4,119
Received 0 Likes
on
0 Posts

Been there done that. To make it worse it is bordered by a creek on one side and a pond on the one end. We keep a boat out there for access. The field was developed back in the early 80's. When it was first built the ground was very rough and hard on planes. Now 30 years later it is like a golf course and a pleasure to fly off of. Here is a Google link and a picture of how it looks in the summer months.
https://www.google.ca/maps/@56.60678.../data=!3m1!1e3
https://www.google.ca/maps/@56.60678.../data=!3m1!1e3
#207
Senior Member
Join Date: Nov 2002
Location: Lenox Township, Michigan
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts

"Timber"..........also known as "jumping plane catchers". I still can't figure how a tree can jump that high ?
My field is also loaded with many of that "timber" on all four sides. It's at a state park and we also have an abundance of *****ly bushes, marshland, water filled ditches and high weeds. At the northeast corner some type of a very thick weed grew to over 6-7 feet last year......try to find a downed plane in that mess !
Joe M.
My field is also loaded with many of that "timber" on all four sides. It's at a state park and we also have an abundance of *****ly bushes, marshland, water filled ditches and high weeds. At the northeast corner some type of a very thick weed grew to over 6-7 feet last year......try to find a downed plane in that mess !
Joe M.
#208
Senior Member
Join Date: Nov 2002
Location: Lenox Township, Michigan
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts

"Timber"..........also known as "jumping plane catchers". I still can't figure how a tree can jump that high ?
My field is also loaded with many of that "timber" on all four sides. It's at a state park and we also have an abundance of *****ly bushes, marshland, water filled ditches and high weeds. At the northeast corner some type of a very thick weed grew to over 6-7 feet last year......try to find a downed plane in that mess !
Joe M.
My field is also loaded with many of that "timber" on all four sides. It's at a state park and we also have an abundance of *****ly bushes, marshland, water filled ditches and high weeds. At the northeast corner some type of a very thick weed grew to over 6-7 feet last year......try to find a downed plane in that mess !
Joe M.
Joe M.
#210
Senior Member
Join Date: Nov 2002
Location: Lenox Township, Michigan
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts

Wonder what would happen if you attempted to use the words: truck, duck, buck, cluck, luck, struck, yuck, suck, muck, tuck or puck ?
How about ever quoting the infamous Curley.......nyuk, nyuk, nyuk ?

Just kidding.
I know RCU is just trying to keep this a family oriented website.
Joe M.
How about ever quoting the infamous Curley.......nyuk, nyuk, nyuk ?


Just kidding.

Joe M.
#211
Senior Member
Join Date: Nov 2002
Location: Lenox Township, Michigan
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts

A beautiful and perfect day here today, so I finally got a chance to test out the muffler silencers on my DLE 55 powered Reactor. I forgot to bring my db meter, but the silencers cut at least 15-20 percent of the exhaust noise. The guys in the peanut gallery all said it was a very noticeable improvement from last year and with only a loss of about 300 rpm!!


I finally got my DLE 35RA and right away did not like the supplied super thin constructed muffler. Then I picked up a JTEC Pitts Style muffler. What difference in quality ! A nice heavy-duty piece !
The I.D. of the downtubes on the JTEC are 14mm and this size silencer is currently not available. I'm planning on using a set of 14.4mm silencers (14.4 mm is the closest size available). The 14.4mm silencers will need to be improvised to fit the 14mm downtubes. As far as a noise improvement, I hope they work out as well as the silencers on my DLE 55.
Because the JTEC muffler is physically larger than the supplied muffler I'm going to need to do a partial re-construction of my engine box. I have been reading about the statements that the cowl is too short and the cowl mounting screws need to mounted right on the very edge of the cowl. By moving my engine slightly more rearward, my cowl mounting screws should line up very well on the sides of the fuse.
Joe M.
#212

My Feedback: (27)
Join Date: Sep 2002
Location: Athol,
ID
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts

Getting close......brought the rx up to date (Hitec) and am now securing/shrink tubing all connections and cleaning up the electrical wires. Thread locking all screws and bolts as I go, a nice plane to assemble
and only a few changes were necessary. One was looping back the choke rod because it was too close to the firewall (35 RA) . I used the DLA furnished throttle arm, securing it with the set screw after filing a flat on the shaft and
then using a screw secured in the center of origional arm, long enough to fully grip the threads after a washer is installed, thread locker is also suggested.
S 08 Being here in the north a number of our fields have timber than can hide a plane for years. One I have flown on is built on a peat bog that shakes when you walk on it. The members use a Golf cart to transport their planes and other gear, It's surrounded with tall grass and has numerous pot-holes.................
and only a few changes were necessary. One was looping back the choke rod because it was too close to the firewall (35 RA) . I used the DLA furnished throttle arm, securing it with the set screw after filing a flat on the shaft and
then using a screw secured in the center of origional arm, long enough to fully grip the threads after a washer is installed, thread locker is also suggested.
S 08 Being here in the north a number of our fields have timber than can hide a plane for years. One I have flown on is built on a peat bog that shakes when you walk on it. The members use a Golf cart to transport their planes and other gear, It's surrounded with tall grass and has numerous pot-holes.................
#213
Senior Member
Join Date: Nov 2002
Location: Lenox Township, Michigan
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts

I'm currently putting together a list of the extra goodies I need to finish up my Escapade.
To you guys running a DLE 35RA: Is the Xoar 19x8 working out OK ? Any other props you would recommend for this engine/bird combo ?
Will the supplied chrome spinner fit the19x8 Xoar ? I sure hate to carve up that shiny new spinner.
Joe M.
To you guys running a DLE 35RA: Is the Xoar 19x8 working out OK ? Any other props you would recommend for this engine/bird combo ?
Will the supplied chrome spinner fit the19x8 Xoar ? I sure hate to carve up that shiny new spinner.
Joe M.
#214
Member
Join Date: Oct 2011
Location: claremore, OK
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts

Im using a 20x8 xoar, been tempted to try a 19x8 but havnt yet. The stock spinner works fine with no mods with 20x8 xoar and a topflight 20x8. The Topflight 20x8 by the way didn't seem to have the power the xoar had.
#215
Senior Member

I'm currently putting together a list of the extra goodies I need to finish up my Escapade.
To you guys running a DLE 35RA: Is the Xoar 19x8 working out OK ? Any other props you would recommend for this engine/bird combo ?
Will the supplied chrome spinner fit the19x8 Xoar ? I sure hate to carve up that shiny new spinner.
Joe M.
To you guys running a DLE 35RA: Is the Xoar 19x8 working out OK ? Any other props you would recommend for this engine/bird combo ?
Will the supplied chrome spinner fit the19x8 Xoar ? I sure hate to carve up that shiny new spinner.
Joe M.
This pass weekend I did a test between the Xoar 19x8 and the falcon 19x8 prop and to me the DLE 35RA love them both!! No mod on the spinner to make them work.
Next I will check out the Xoar 20x8 to see if the DLE 35RA like it!!
Sonny
aka
jet22b
#218
Member
Join Date: Oct 2011
Location: claremore, OK
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts

Im using what I had on hand which was savox SC-0251 MG on every thing except throttle which is a hitec 645. Those are plugged into a futaba equipment, 7008 receiver 14sg radio. For battaries im using are dual 5 cell 1800mah nimh batteries for the radio and a 5 cell 1600mah nimh battery for the ignition. It all seems to work great.
#219

My Feedback: (2)
Join Date: Dec 2007
Location: Fort McMurray,
AB, CANADA
Posts: 4,119
Received 0 Likes
on
0 Posts

Same as me, I used what I had laying around. Two Savox SC1256TG on elevators and a Hitec 7950 on the rudder. Throttle and choke are Savox SC-0251 and some Power HD on the flaps and ailerons. Rx battery is a 4200 mah Life and a 2500 mah NiMh on the ignition.
#220
Junior Member
Join Date: Jun 2014
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts

Hey guys, got my Escapade together, maiden flight this last weekend. Since I'm really a beginner, I put it in the capable hands of someone with 35 years of flying experience to trim it and tell me all was good. I had a Giant Ugly Stik that I flew a wing off last fall, and I had a DLE 55 on it, when it went in, it broke the crankcase and head, so I replaced that and used the 55 on this.. The plane is a beast, and will hang on the prop with 1/4 throttle! My buddy says the plane is bad azz and has no bad tendencies.. I almost could not get the Tx out of his hands! haha
Had a few small issues, the guys, (and girls) at Tower Hobbies solved them ASAP!
Here's a few pics, and I'll post some vid as well..
This is my first build.

Had to do some trimming, and use the JT Pitts to even think about mounting the cowl, also had to come up with the engine positioning on my own, but it just fits, also fiberglassed the whole backside of the firewall to tighten things up.


Giant tank!! My fingers will wear out before it runs outta fuel.. lol

I'm gonna get the cowl on for next weekend..
Had a few small issues, the guys, (and girls) at Tower Hobbies solved them ASAP!
Here's a few pics, and I'll post some vid as well..
This is my first build.

Had to do some trimming, and use the JT Pitts to even think about mounting the cowl, also had to come up with the engine positioning on my own, but it just fits, also fiberglassed the whole backside of the firewall to tighten things up.


Giant tank!! My fingers will wear out before it runs outta fuel.. lol

I'm gonna get the cowl on for next weekend..

Last edited by 1FastMopar; 05-26-2015 at 03:53 PM.
#222
Senior Member

1FastMopar;
The plane look good!! You put a DLE 55 in the nose!!! "WOW"!! Looking at the pictures of it at the field, the prop that you are using, look very close to the ground. Will the stock cowl fit over the DLE 55 without major mod??
I just may pickup one more when they come back in-stock
Again, congrat on the maiden and yes you will have to keep a close eye on your tx when you take her to the field. lol!!!
Sonny
aka
jet22b
The plane look good!! You put a DLE 55 in the nose!!! "WOW"!! Looking at the pictures of it at the field, the prop that you are using, look very close to the ground. Will the stock cowl fit over the DLE 55 without major mod??
I just may pickup one more when they come back in-stock
Again, congrat on the maiden and yes you will have to keep a close eye on your tx when you take her to the field. lol!!!
Sonny
aka
jet22b
#223

My Feedback: (2)
Join Date: Dec 2007
Location: Fort McMurray,
AB, CANADA
Posts: 4,119
Received 0 Likes
on
0 Posts

It would have about the same power to weight ratio as when I had one on a Giant Stik. It flies real nice with a 30-35 but if you want to really have fun that is the way to go. The larger engine is much harder on the airframe and will shorten its life so it is a decision a person has to make. I for one know I had some fun with a 55 on my old Stik.