Help! Need Spinner For Extra 300xs
 

Hey everyone,

Need some help finding the part # for the Tru Turn Alum Spinner that works with the zinger 18-6 Prop. Want to make sure I get the right spinner that will accept a little larger 18X? prop and don't want to order the wrong one.

Part #'s of any alum spinner you are using with your Sig Extra 300xs would be great.

Thanks for the help,

Help! Need Spinner For Extra 300xs
 

I have one that I used on my PW Extra.
$20 and it is yours.
WHat field do you fly at?
I am at the Conley and Griffin Fields

Help! Need Spinner For Extra 300xs
 

Sent you PM

Tru Turn
 

If you still need a spinner, just give them a call direct.
Tru-Turn/ ROMCO Manufacturing 281-479-9600

They will custom cut the spinner, based on the props you intend on using. The have machining co-ordinates for most (if not all) of the popular prop makes/sizes. You wind up with a really clean slot, that will fit your prop choices perfectly. They also offer a light backplate that helps cut some weight off, if you need it.

Tru-Turn Special Slotting Options
http://www.truturn.com/cgi-bin/store...clo&ppinc=slot

I've placed several orders with them. Superior product, and they are really nice people to deal with!

I fly the Sig Extra 300XS with OS 1.60 and the 3" Spinner TT-3002-B.

Help! Need Spinner For Extra 300xs
 

Rex,

What prop sizes are you using?

Help! Need Spinner For Extra 300xs
 

I started out running APC's. 16X10, 18X6W, 18X8N, and 18X8W. The 18X8W was best, but the plane was just to fast, and had little braking.
I then went to Zinger wood props. 18X10, 18X8, 18X6-10, and I currently fly with the 20-6 cut back to 19.
I would recommend experimenting with different props to find the one right for you, and your environment. It's more pilot preference than an exact setup. I have friends flying the OS 1.60 with the APC 18X8N and 18X10 and that's what they prefer.
You should really like the Extra! I started out with the 27% CG, but have been slowly moving it back to find the right spot.
Have fun!

Help! Need Spinner For Extra 300xs
 

Thanks for the help, called Tru Turn this morning and ordered a 3" spinner cut for a 18x10 zinger prop. That should give me some room to play around with.

Thanks again for the help,