U CAN DO 3D SETUP QUESTION
 

i have 60 size u can do 3d i used hitec hs475hb deluxe all over except the rudder and i used a hs 605bb super tourque will this be ok? i am also running a 91 4 stroke with a 12-6 prop will this work? oh yea a servo reverser is being used too

RE: U CAN DO 3D SETUP QUESTION
 

THAT PROP IS A LITTLE SMALL.
I AM ABOUT TO GET A U CAN DO AND I HAVE BEEN SEEING 14X6,14X8 FOR A FOUR STROKE. FOR STROKES CAN PUSH BIGGER PROPS.

RE: U CAN DO 3D SETUP QUESTION
 

Agreed, that prop is WAYYYYY to small, I run a 14x6 on may saito .72 and get 9750 rpm's...

RE: U CAN DO 3D SETUP QUESTION
 

I have that plane witha Saito 91 with a 14x6 prop that works well. Im going to a Saito 100 and will go bigger then too ;)