Which To Choose-Cloud Dancer or VF 300S???
 

I am torn between 2 models for my next purchase. I am an intermediate type flyer and would be interested in opinions regarding the VectorFlight 300S with a 66" WS or the TT Cloud Dancer 60 with a 72" WS. This is purely for sport flying.

I value the opions of the members here and would like your help in deciding on which model might be the best if money were not part of the equation.

Thanks,

RE: Which To Choose???
 

I can't say about the Cloud Dancer but I can say about the VF 66 Extra, It would depend I guess on what you want the plane for. The VF Line in not known for 3D if this is what you plan. The one I have is very stable and fast with a .91 two stroke. and light at 7 1/2 pounds with the setup I have. It goes together pretty fast and is a good buy for the money. Takes a couple of weeks to get one as I last heard. Anyway I'll do the best I can to answer any questions you might have. Check the thread below if you havent yet, lots of good reviews.

Miloh.

http://www.rcuniverse.com/forum/Vect..._943924/tm.htm

RE: Which To Choose???
 

agree with the VF Extra, outstanding quality

RE: Which To Choose???
 

Thanks for the input guys.

I did read the thread Miloh, and while it started out about the 66" 300S, it seemed to move towards the 540 pretty quickly and the Edge doesn't interest me at this time.

I am hoping that I can get some comments on the Cloud Dancer 60 to compare to the 300S.

Thanks again,

RE: Which To Choose???
 

Welcome..good luck

Miloh.

RE: Which To Choose???
 

I own a Cloud Dancer and am very happy with it. It is designed mostly for sport and pattern aerobatics. I have not tried 3D with it and I don't think I will, thats not what it was made for. I cant comment on the 300S but the CD is a very nice flying plane and would not dissapoint you.