RE: Dave Patrick super cub
 

The Point Is not the shortcommings of the 25e Cub, but the posability of Horizon producing a 1/4 scale varient. That in my opinion would solve the shortage of Super Cub's currently. If you look the 25e Cub's L/G and struts are scaled down versions of there 1/4 J-3, which is the same as the D.P. Might do a 25e with a Saito 40 while I wait! Kind'a like a small fix for the problem.

RE: Dave Patrick super cub
 

need a arf, looking at the e-flite p-18 , my dp p-18 is going ok but the landing gear from the hh 1/4 cub dont fit the dp p-18, fuse is not as wide , may get out the hammer and start bending the gear and yes paint will flake off and IAM NOT GIVING UP , some day it will fly , even if glow fuel goes to 50 $ a gal, thanks frank

RE: Dave Patrick super cub
 

Frank bolt that gear on &figure out what needs done to make it work, you got something I've been drooling over for the past few years, don't let the L/G stop you from finishing it. The cross brace and outer sliding strut may need cut down a bit, don't bend things up!

RE: Dave Patrick super cub
 

Or get some of [link=http://www.cublandinggear.com/]these.[/link]

RE: Dave Patrick super cub
 

They don't mention that their gear will fit the D. Patrick Cub.

RE: Dave Patrick super cub
 

took a look see and no match , still hanger 9 set will fit with some mods new pic coming thanks frank

RE: Dave Patrick super cub
 

Have you tried Robart. I swear someone said he makes a matching set...

RE: Dave Patrick super cub
 

pics servos i am going to use and axels close but no cigar thanks frank

RE: Dave Patrick super cub
 

I copied this of their homepage. "We can custom build a gear for you upon request."
Also, there is an ect at the end of their manufactures list.

RE: Dave Patrick super cub
 

I used the same gear on an old H-9 Super cub, we just shortened the shock tubes, and drilled new holes in them. Worked great for us.

RE: Dave Patrick super cub
 

By the looks of the pictures, Frank needs longer tubes than he has there. The fuselage is a bit wider than most. It might be a good idea to call Wm.C. Wallace to see if they can make new tubes for it.

RE: Dave Patrick super cub
 

Highly recommend the guys at http://cublandinggear.com , absolutely awsome gear. Mine was ordered "custom" and Tommy did an incredible job. Fits my 1/4 scale Balsa USA Supercub Bushplane and completes the look I was going for. Time to head to Valdez Alaska and show them how to really fly STOL.

RE: Dave Patrick super cub
 

Hi,

Anyone know status of Dave Patrick Models Piper PA-18 Super Cub ARF if it will be available again?

/Bo

RE: Dave Patrick super cub
 

Don't count on it. Cermark has come close as anyone to re-releasing it, and thats going back a couple years. Several months ago I emailed them to find out what was going on with it, as their web site stated for the longest time they were looking for a 2010 release or something like that. Anyway, apparently there were some production problems, who knows what the real story is, long and short of it, they've let it go and not pursuing it further. That was my understanding. Like others I was on Dave's list for close to a year or more, and you finally realized it just wasn't going to happen, weren't enough made or whatever. Those that got one from Dave were fortunate indeed.... I think finding one NIB would be a pretty rare event, but I keep looking.

RE: Dave Patrick super cub
 

Yes, that's right, not likely to reappear. That's too bad, the plane was the best ARF I have ever made, it was state of the art and still is better than many of the so called premium ARFs out today. I was lucky enough to get one of the originals back in 2004, and I used a OS 160 twin for power. (see some of my earlier posts on this thread for pics) Not only was the design and parts top notch, the instruction book was outstanding as well (and in real english). I am rebuilding mine after an unfortunate nose plant, and I will re-maiden in the next few weeks. I still have to make a new windshield, I am making a plaster mold from the old piece to try to vacuum form the replacement. After so many ARFs, I got to do some real old time balsa butchering to rebuild everything from the wing forward. The OS twin is a perfect match for that airplane, and the sound fits it to a tee. I don't go for the chain saw engine sound, even though glow is $12 more per gallon than gasoline.

RE: Dave Patrick super cub
 

Farmerric,

As far as the windshield for your DP Super Cub, give this company a try. He had some at one time, even though it is not listed on their website. The windshiled fit perfect as I have on on my DP Cub and I not long ago referred another DP Cub owner to Aerotech for a windshield as well.

http://aerotechmodels.com/

Dan

RE: Dave Patrick super cub
 

deadstickdan
thanks for the info, Iwill give it a try

RE: Dave Patrick super cub
 

I contacted Aerotech Models about the windshield. They have it and it is very expensive at $45. shipped. But then, it is the only place to get one unless you make your own.

RE: Dave Patrick super cub
 

welcome to the rc hobby...:eek:

RE: Dave Patrick super cub
 

Just completed repairs on a DP Pa 18.A club member had crashed it a few years ago an at that time it had only @ 5 fights on it.It now fly's as a L 21A.( the best of both worlds).As soon as I recieve flight photos I will post

Crazystick

RE: Dave Patrick super cub
 

Looks nice. So, what did you change about it other than putting in the door? Did you recover it with fabric and dope?

RE: Dave Patrick super cub
 

The wings had very little damage,repaired tips. The nose was broken off,repaired replaced Cowl and windsheld.The damaged area was recovered with utra-coat. It is powered by a CRRC PRO 26R which turns a 18/6 prop.So for it has 7 flights on it since repairs. The best thing was that I got the airframe for only $200

Crazystick

RE: Dave Patrick super cub
 

Oh,I almost forgot,The door was put on to hide the switchs and the fuel dot

Crazystick

RE: Dave Patrick super cub
 

I just noticed today that the damage that the plane had when it crashed extended to the wing strut end.Has anyone seen these struts apart (how the tips are attached?)So for I have @ 50 flights with only flight loads on the air frame!

Thanks Crazystick

RE: Dave Patrick super cub
 

Looks like Horizon put the DP Cub through the copy machine.  http://www.horizonhobby.com/products...age1-_-HAN4540