Wing Gap how to Fill ?
 

Have a small gap on some areas after joining the wing on a TT laxy tiger p51.

Would putting milled glass into the gap and adding thin ca do it or is mixing milled glass with epoxy and squirting it in with a medical syringe be better or do yo have a better solution ??

Thanks, Dennis

Silcon
 

Since the lazy tiger is an ARF I would just put a liltte Silcon on the saddle and put wax paper over the wing and bolt it down. I have also used light-weight spackling and when it dries put some thin CA on it.

Wing Gap how to Fill ?
 

If the gap is in the wing joint where you put the two half together then just use 30 min epoxy and force it in the gaps and let dry all the time use alcohol to clean any that seeps out making a nice clean fit

Thanks All are great options.
 

i THINK i'LL squirt in epoxy with milled glass mixed in. but all suggestions sound good just have the epoxy and glass avail.

Sideliner thanks for the many posts to my many troubles :-) have to buy ya a beer whae I ever get to vegas.

Wing Gap how to Fill ?
 

Any time Dennis be glad to have you out here. If you have any other problems just Email me at [email protected] be more than happy to give you a hand anytime Pat PS- look at my gallery and see some of my birds