|
RE: Modeltech P47 servos...
Has anybody used a joiner on the elevator halves and used a single pushrod? Don't know how much I like having to cut down one of the horns to make the rudder horn fit..... looks like there's plenty of room to install a joiner.
Andy |
RE: Modeltech P47 servos...
No but I did change it over to 4-40 including the "Y" up front
ORIGINAL: a65l Has anybody used a joiner on the elevator halves and used a single pushrod? Don't know how much I like having to cut down one of the horns to make the rudder horn fit..... looks like there's plenty of room to install a joiner. Andy |
RE: Modeltech P47 servos...
In any case I'm going to use straight 4-40 rods and pass on the flex rods.
Andy |
RE: Modeltech P47 servos...
1 Attachment(s)
Here's mine.
|
| All times are GMT -8. The time now is 05:32 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.