RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)
-   -   Who makes a Cub or Clipped Cub ARF 50"-60" span (https://www.rcuniverse.com/forum/arf-rtf-75/3367811-who-makes-cub-clipped-cub-arf-50%22-60%22-span.html)

Quicksdraw MaGraw 09-17-2005 03:58 PM

Who makes a Cub or Clipped Cub ARF 50"-60" span
 
I have a small car and can't move anything larger.

cochinito77 09-17-2005 04:41 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
world models makes a clipped wing cub thats 63'' wingspan and isisn't too shabby for the price, at least i think. heres the link.
http://www.airborne-models.com/html/...p?ProductID=72

ckangaroo70 09-17-2005 06:21 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
Not an ARF, but Sig makes a nice little 1/6 scale Clipped Wing Cub Kit with a 56" wing span. Uses up to a 40 size engine. $75 for the kit.
http://www.sigmfg.com/cgi-bin/dpsmar...FV4.html?E+Sig

piper_chuck 09-17-2005 09:00 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 

ORIGINAL: cochinito77

world models makes a clipped wing cub thats 63'' wingspan and isisn't too shabby for the price, at least i think. heres the link.
http://www.airborne-models.com/html/...p?ProductID=72
I have one of these, but it's still in the box. I've pulled some of the pieces out and from what I've seen, it's very well made. As soon as room opens up on the radio, out of memory positions, it's one of the planes on the short list for assembling.

beelzebubishere 09-18-2005 10:55 AM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
There is also the 1/8 scale cub...
http://www.airborne-models.com/html/...p?ProductID=26

Quicksdraw MaGraw 09-18-2005 01:48 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
So far these all look pretty nice. ARF with the best scale look is what I'm after. Do any of these have flaps?

beelzebubishere 09-18-2005 03:22 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
I'd say probably not on the 1/8 scale Cub, or even the 1/6....not sure about the rest.

mtucker 09-25-2005 08:20 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
I flew my World Models 63" clipped wing cub today for the first time. I bought it used and fully assembled. She doesn't have flaps, but since it uses a servo for each aileron you could program your radio for flaperons or spoilerons. She slows down fairly well for landing though.
It has a very high roll rate (for a cub) and flew inverted without fuss. She looks good coming down the runway low and slow. The wing comes off in one piece. I fit it into my little Toyota truck (extra cab) without problems.
Matt

mtucker 09-25-2005 08:42 PM

RE: Who makes a Cub or Clipped Cub ARF 50"-60" span
 
1 Attachment(s)
Without the front cowl.
Matt


All times are GMT -8. The time now is 06:46 AM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.