Which ARF for Brillelli 46cc engine?
 

I just ordered a Brillelli 46cc engine with electronic ignition.

Which ARF would you buy if you had this engine? TIA

RE: Which ARF for Brillelli 46cc engine?
 

kangke waco biplane
http://www.kangkeusa.com/Super_Kraft/images/Waco_L.jpg

RE: Which ARF for Brillelli 46cc engine?
 

What do you fly?? Sport, Scale, Aerobatic????

RE: Which ARF for Brillelli 46cc engine?
 

If you look on Brillelli's site, http://www.scottellingson.com/
They have a lot of pics of planes with the Brillelli 46cc engine. The Yak 54 looks nice.

RE: Which ARF for Brillelli 46cc engine?
 

[link=http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKJB5&P=0]GP Ultimate Bipe[/link]

RE: Which ARF for Brillelli 46cc engine?
 

Thanks, everyone. I like biplanes, but I don't have the energy for setup and break down. I should have said something in my original post.

I ended up ordering a Kangke CAP-21 ARF.

RE: Which ARF for Brillelli 46cc engine?
 

I have a CG Extra 330 / Brillelli 46cc on it // Awesome combo.
I had a balance issue with the plane at first because I bought the plane with this combo and the original guy who set it up used a pull/pull. I sence moved the servo to the tail.
My plane weighs 13.15oz with the Brillelli .
The bare engine weighs just 2 lbs 13oz and this is lighter then a DA-50.
I use single Hitec 645mg for all surfaces @6v with a standard mini on the throttle.
I have 2800 Li-Ion from TBM with6v reg and 2800 Li-Ion from TBM with 5.4v reg for ign. These are lighter then any nimh or ni-cad. I have pitched all the crap foam wheels and use TBM Kavans light wheels. I also lightned the heavy canopy hatch and use no pilot or dash and took off 6.4 oz alone for that mod. Painted the canopy black.
Brillelli sells a light weight alum engine mounts at 3.2oz thats lighter then the others ones i had @ 5.0oz
Little details like this add up.
If you run a glow engine use the pull/pull and move the servo to the tail for a gasser.
This setup has insane power to weight. Hovers at 1/3 throttle. Light 3D floater. Love the fact that I don't have to trailer this size of plane. Fits in my short box 5.5' pick-up truck
I run a Xoar 22x8 on it.
Customer service from Brillelli is as good as anyone could ever hope for.
I look at Brillelli this way. For a 46cc not a true 50cc. It's 95+% of the of DA-50's horsepower at half the cost, That's a awesome bargain in my world.
The Extra 330 's are now selling for $265 bucks and where else could you get a great flying gasser for around a $1,000 bucks?
Plane $265.00
Engine $355.00
Hitec 645mg x5 $200.00
2800 Li-Ion from TBMx2 with regs appox $100.00
Wheels,throttle servos,Prop,ect,ect.. $100.00
Not including shipping Total - $1000.00+

Not having to clean up Glow Goo is a wonderful thing