CMP Cap 232 3D .25 Size
 

I have been eyeballing this plane for a while. Does anybody have one? I would like to hear about it. Thanks.
http://nitroplanes.com/ca343arfraco.html

RE: CMP Cap 232 3D .25 Size
 

[link]http://www.rcuniverse.com/forum/m_2851600/tm.htm[/link]

Here is a small thread about this plane. I don't have one but, I hope this helps you out.

RE: CMP Cap 232 3D .25 Size
 

I actually just finished building one. It's a nice ARF. The cowl is nice and big. I was able to fit a Magnum .32 with a pitts muffler in the cowl without buchering it. Any particular questions? I'll post a few pics and potentialy a mini-review within a day or so.

Dave

RE: CMP Cap 232 3D .25 Size
 

I am interested in the balance in terms of the weight of the engine required without adding additional weight. My options for engines are 25FX, K&B model 4050, or Saito 40/56. Strength of the horizontal stab. Rudder coupling. Recomended COG. The fit of the wing saddle. Access to reinforce the landing gear mount and of course how she flies! Thanks