Ucan2 Arf ?
 

Just wondering if anyone has bought, and flown the UCAN2 ARF imported by Norvel dot com ? If you have, what engine choice did you fly it with, and how well, or poor did it fly ? I'm thinking of using a PAW BR .061 diesel engine on one. What do you think ?
Thanks,
Dennis

Ucan2 Arf ?
 

Check out all the U-Can-Do 3D posts in the 3-D Flying Forum.

Ucan2 Arf ?
 

Got a link for this plane? I tried www.norvel.com and it didn't work for me.

Edit - oops, I tried it again and it worked. Looks like a nice little plane.

Ucan2 Arf ?
 

GBee,
I think your talking about a bit of a bigger bird. The one I'm refurring to is supposed to be 1/2A powered (.049-.061) engine. But, the plane on 3D flying you're talking about is nice......and big.
FlyFalcons,
Thanks, yup, I'm really thinking about trying one and mounting a PAW BR .061 RC on it. Either that, or I'm going for the gusto, and I'm going to build a Herr "Cloud Ranger". There supposed to be pretty tough. That's probabl;y what I need more than the under wing bird IE:the UCAN2 ARF.
Thanks guys,
Dennis

Ucan2 Arf ?
 

here is the link to the UCAN2

Ucan2 Arf ?
 

I had a ucan IT FLEW GOOD WITH A NORVEL 074 .IT HAD ABOUT 175 FLIGHTS ON IT. I WAS LOOKING FOR SOMTHING MORE AROBATIC SO I BUILT A HOUSE OF BALSA EXTRA 300 WITH THE 074.IF YOU ARE LOOKING FOR A ARF THE UCAN IS A GOOD PLANE.

RE: Ucan2 Arf ?
 

Hi -
I have the UCAN2 from Novel - I love it - I am a beginner and had an experience flyer take it up for me the first time. He put it through loops , rolls, stalls etc and found the plane to respond very well. No bad traits -
I run a Novel .074 engine, I did however mount the rudder and elevator servers in the rear fuselage because it was so crowded with the aileron servo's etc.
I have flown it solo - and is very exciting to fly, and lands perfectly. I tried a roll and due to my lack of experience I lost it for a moment but it was easy to recover - Good Luck and would like to hear how you do.
John