Servo question
 

I have a World Models Nemesis and a Hangar 9 Twist 150 3D that needs completed. I am wondering what servos to go with......... I am looking at the JR DS821 digitals / Hitec HS-635HB / Hitec HS-645MG Or, if you have a different suggestion, let me know. The JR and the 635 are similar in specs with the difference being digital, and karbonite vs. nylon. The 645's may be way to much performance wise for these planes. Let me know what you think.

Thanks

RE: Servo question
 

I have a set of these [link=http://www.hobbypeople.net/gallery/440702.asp]fast servos[/link] and these [link=http://www.hobbypeople.net/gallery/440703.asp] hi torque[/link]

They are working better then I thought they would. I expected cheap, jittery, sloppy servos. They are pretty dang good. I have them in a .63 powered Giles. They work very well.



Dru.

RE: Servo question
 

You won't go wrong with any of those. I use the JR 821's but I've been using Jr equipment for over 20 years so I'm partial but with good reason. Have also used Hitec's often with no problems.

RE: Servo question
 

I think the warning on the 821's says not to use them on bigger than 90 or 120 size planes.