RCU Forums - dreamer 40

RCU Forums (https://www.rcuniverse.com/forum/)

- ARF or RTF (https://www.rcuniverse.com/forum/arf-rtf-75/)

- - dreamer 40 (https://www.rcuniverse.com/forum/arf-rtf-75/9380436-dreamer-40-a.html)

michael wood

01-02-2010 02:10 PM

dreamer 40

anybody bought the dreamer 40 from toyneer off e-bay?

michael wood

01-03-2010 11:24 AM

RE: dreamer 40

ok guy this is what i got the instruction book has two CGs one is 67mm the other is 80.5mm so what I did was used a MAC calulator to figure the CG I have a wing cord of 9.5 and a wing span of 55inchesI punched in the numbers and came up with A CG of 2.66 inches that number falls in between the 67mm and 80.5mm by the way I like to use 25-28 mac as a starting point so what do you all think michael

michael wood

01-16-2010 09:20 PM

RE: dreamer 40

well I flew it today and it flew great rolls were good loops ok i have it a bit nose heavy so the landings were a little fast I have it balanced at the cg it would be a good first low wing trainer for 79.00 and free shipping its on e-bay thanks michael

All times are GMT -8. The time now is 08:29 AM.