Go Back  RCU Forums > Radios, Batteries, Clubhouse and more > Batteries & Chargers
Reload this Page >

Need receiver battery for ten-t

Notices
Batteries & Chargers Nicads, Nickel Metal Hydride, Lithium, LiPoly, Chargers, Cyclers, etc...

Need receiver battery for ten-t

Old 11-04-2022, 07:27 AM
  #1  
Anything rc is fun
Junior Member
Thread Starter
 
Join Date: Jul 2020
Posts: 7
Likes: 0
Received 1 Like on 1 Post
Default Need receiver battery for ten-t

Hello everyone! After much consideration I recently purchased a losi ten t off of eBay. This car means a lot to me, I have pictures of me as a toddler with one on my lap, it was my dads favorite rc for a long time, around 2015 he converted it to a scte, which it still is today. However, I have lots of parts for them including several 3.4s, chassis, suspension arms, shocks, almost enough to build my own lol. Anyways sorry for the life story, but a cool quirk of these trucks is that they have the R.O.S.S system(remote onboard starting system) which I am going to install on it as the one I bought is just a roller with servos, I have all the parts I need for the Ross except for a battery. These used the same battery for the receiver and the starter, so itís kinda a special battery, the most recent version I found was SPMB1000LPRX
can you guys try to do your magic and find a similar battery? Iíve been looking but to no avail and thought this may be a good place to look.

thank you!
Old 11-05-2022, 04:33 AM
  #2  
init4fun
 
init4fun's Avatar
 
Join Date: May 2009
Location: Massachusetts
Posts: 4,172
Received 43 Likes on 37 Posts
Default

Originally Posted by Anything rc is fun View Post
Hello everyone! After much consideration I recently purchased a losi ten t off of eBay. This car means a lot to me, I have pictures of me as a toddler with one on my lap, it was my dads favorite rc for a long time, around 2015 he converted it to a scte, which it still is today. However, I have lots of parts for them including several 3.4s, chassis, suspension arms, shocks, almost enough to build my own lol. Anyways sorry for the life story, but a cool quirk of these trucks is that they have the R.O.S.S system(remote onboard starting system) which I am going to install on it as the one I bought is just a roller with servos, I have all the parts I need for the Ross except for a battery. These used the same battery for the receiver and the starter, so it’s kinda a special battery, the most recent version I found was SPMB1000LPRX
can you guys try to do your magic and find a similar battery? I’ve been looking but to no avail and thought this may be a good place to look.

thank you!

Amazon has ya covered.......

Amazon Amazon

Last edited by init4fun; 11-05-2022 at 04:36 AM.
Old 11-16-2022, 12:54 PM
  #3  
mia45943
Junior Member
 
Join Date: Dec 2020
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Anything rc is fun View Post
Hello everyone! After much consideration I recently purchased a losi ten t off of eBay. This car means a lot to me, I have pictures of me as a toddler with one on my lap, it was my dads favorite rc for a long time, around 2015 he converted it to a scte, which it still is today. However, I have lots of parts for them including several 3.4s, chassis, suspension arms, shocks, almost enough to build my own lol. Anyways sorry for the life story, but a cool quirk of these trucks is that they have the epoxy floor coating Atlanta R.O.S.S system(remote onboard starting system) which I am going to install on it as the one I bought is just a roller with servos, I have all the parts I need for the Ross except for a battery. These used the same battery for the receiver and the starter, so it’s kinda a special battery, the most recent version I found was SPMB1000LPRX
can you guys try to do your magic and find a similar battery? I’ve been looking but to no avail and thought this may be a good place to look.

thank you
!
Have losi t ten. I didn't like the lipo starting battery a ecelorin 7.4 1000mah 10c. I found a battery that fit battery box a 7.4 1300 mah 15c ecelorin I put it in and it started. I then replaced servos with 5685 hi- tec high voltage servos made for lipo batteries. I put it back together and servos work great but couldn't start with transmitter push button start. I bypassed the ross remote onboard module and got starter motor to turn over. Do you think the onboard module is bad getting no current to it, either it's that or hooked wires to receiver wrong here is list how I put wires into the receiver ports. Took throttle wires hooked to thr port on receiver. Took steering servo put into str port receiver. Took wire around engine for temp and hooked into temp port. took speed senser wire that gets speed from driveshaft and hooked to rpm port. Here is where I think I made error. Their is a wire that i don't know where it comes from and hooked to bind/ rs port. Any ideas thanks

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.