Batteries & Chargers Nicads, Nickel Metal Hydride, Lithium, LiPoly, Chargers, Cyclers, etc...

Attn: Hobbico Elite Owners

Old 03-23-2005, 09:16 AM
Senior Member
Thread Starter
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove, GA
Posts: 12,942
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Attn: Hobbico Elite Owners

To check it, hook the meter in line and when you are charging the pack (1.0 amps) check to see if the current flowing to the pack is 1.0 amps. I did this check on my system and measured 200ma at 202.5 ma. This is close enough for me.

As far as how to calibrate it?
I would send it back to Hobby services with your readings.
Also make sure your meter is good.
Also check to see that the math is right.
If you charge at a particular current for the amount of time specified, make sure that the capacity reading matches the math.
ORIGINAL: Francis Fernand
I do not have any meter, but I can get one.
How do I know if the Elite is not calibrated ? or How do I calibrate the Elite ?
Thanks in advance,

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.