" AA " Nicad Questions
03-03-2005, 02:27 PM
#1
Senior Member
Thread Starter
Join Date: May 2002
Location: Calgary,
AB, CANADA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
" AA " Nicad Questions
A LHS is selling Sanyo " AA " 2300 mah Nimh with tabs for $ 5.00 CDN each
How will they work for my E flyer
GP Supersporster EP
Kyosho endo motor , GD 600 with 3.8 : 1 drive and a 12X8 APC
Are these cells OK for fast charging like C1 and can they handle a very fast discharge ( flying ) ?
I think they would be a weight reduction with 8 " AA " cells.
Thanks in advance
Fred..
How will they work for my E flyer
GP Supersporster EP
Kyosho endo motor , GD 600 with 3.8 : 1 drive and a 12X8 APC
Are these cells OK for fast charging like C1 and can they handle a very fast discharge ( flying ) ?
I think they would be a weight reduction with 8 " AA " cells.
Thanks in advance
Fred..
03-04-2005, 11:58 AM
#2
RE: " AA " Nicad Questions
I went to Sanyo site and found a "AA" Nimh 2300 mAh cell
Here is the PDF file
http://sanyo.wslogic.com/pdf/pdfs/HR-3U-2300.pdf
They are rated for 1C charging and show a 4.8A discharge curve.
Their rated AC impedance is 25 milli ohm at 1000 hertz.
John
Here is the PDF file
http://sanyo.wslogic.com/pdf/pdfs/HR-3U-2300.pdf
They are rated for 1C charging and show a 4.8A discharge curve.
Their rated AC impedance is 25 milli ohm at 1000 hertz.
John
