Will this setup work
06-28-2003 | 12:23 AM
#1
Thread Starter
Senior Member
Joined: Mar 2003
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
From: Tulsa, OK,
Will this setup work
Lithium-polymer 700Mah Battery
GWS speed controler
GWS speed 300 motor
Triton peak charger
My main questions in this list are whether or not the lithium-polymer can be charged with my Triton and if the GWS speed 300 will draw too much current.
THANKS
Tom
GWS speed controler
GWS speed 300 motor
Triton peak charger
My main questions in this list are whether or not the lithium-polymer can be charged with my Triton and if the GWS speed 300 will draw too much current.
THANKS
Tom
06-28-2003 | 12:34 AM
#2
Senior Member
My Feedback: (16)
Joined: Apr 2002
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
From: Locust Grove,
GA
Will this setup work
According to the Triton documentation, it will handle Lithium cells.
Handles 1-24 cell NiCd or NiMH cells, 1-4 Lithium-Ion or Lithium-
Polymer cells (Li-Ion/Li-Po) or 6,12, and 24V lead-acid
batteries (Pb). 24V lead acid batteries and 1-3 lithium-polymer cells.
You above set-up should work with two cell packs.
Handles 1-24 cell NiCd or NiMH cells, 1-4 Lithium-Ion or Lithium-
Polymer cells (Li-Ion/Li-Po) or 6,12, and 24V lead-acid
batteries (Pb). 24V lead acid batteries and 1-3 lithium-polymer cells.
You above set-up should work with two cell packs.
