RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Batteries & Chargers (https://www.rcuniverse.com/forum/batteries-chargers-84/)
-   -   engine conversion and batt requirments (https://www.rcuniverse.com/forum/batteries-chargers-84/8169689-engine-conversion-batt-requirments.html)

amen 11-21-2008 03:07 PM

engine conversion and batt requirments
 
I just coverted my engine from a 22t down to a 17t orion sv2 method, great little engine btw. now the question is; how do i know what mah batt to get to keep up with the demands of the new engine. the batt i'm using is a nosram 7.2v nimh 4600mah.
any thoughts[8D]

guver 11-21-2008 03:40 PM

RE: engine conversion and batt requirments
 
It won't be too particular, anything 3300 and over will do the job. The bigger ones will simply run longer.

Barber420 11-21-2008 03:42 PM

RE: engine conversion and batt requirments
 
That battery is fine. I use IB cell 7.2v 4200mah batts with my 17T motors. By the way, technically, electrics run on motors and nitro uses engines. Not a big deal at all, but switching the terms can confuse people in certain situations. If you want more speed you can always still upgrade to an 7cell 8.4v battery!:D

amen 11-22-2008 02:43 AM

RE: engine conversion and batt requirments
 
will upgrading to a 7cell 8.4v battery fry anything??

guver 11-22-2008 05:04 PM

RE: engine conversion and batt requirments
 
As long as the gearing and/or load isn't too high a 17 turn motor is fine on 7 cells. 8 cells would be about the max that I'd recommend.

Barber420 11-22-2008 05:33 PM

RE: engine conversion and batt requirments
 


ORIGINAL: guver

As long as the gearing and/or load isn't too high a 17 turn motor is fine on 7 cells. 8 cells would be about the max that I'd recommend.
+1


All times are GMT -8. The time now is 09:53 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.