RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Batteries & Chargers (https://www.rcuniverse.com/forum/batteries-chargers-84/)
-   -   accucel 6 charger question (https://www.rcuniverse.com/forum/batteries-chargers-84/9434982-accucel-6-charger-question.html)

Traxxas4fun 01-21-2010 11:26 AM

accucel 6 charger question
 
when i have my lipos in "Charge mode" does it balance them also?

when i have my lipos in "balance mode" does it charge them too?

TomBates 01-21-2010 11:38 AM

RE: accucel 6 charger question
 
It does both as long as you have both leads hooked up.

Traxxas4fun 01-21-2010 12:30 PM

RE: accucel 6 charger question
 
so it charges and balances in both modes aslong as i have the balaning connector hooked up

TomBates 01-21-2010 12:34 PM

RE: accucel 6 charger question
 
Yes

N1EDM 01-21-2010 08:04 PM

RE: accucel 6 charger question
 
In regards to the Accucel 6, I always have a problem trying to find the 'maintenance charge' screen. Does anyone else have problems like that?? I just can't seem to 'get there from here'.

Bob

TomBates 01-22-2010 11:20 AM

RE: accucel 6 charger question
 
I'm pretty new to this myself but I have no idea what "Maintenance Charge" is. Do you mean "Storage Charge" ?



ORIGINAL: N1EDM

In regards to the Accucel 6, I always have a problem trying to find the 'maintenance charge' screen. Does anyone else have problems like that?? I just can't seem to 'get there from here'.

Bob

N1EDM 01-22-2010 07:52 PM

RE: accucel 6 charger question
 
Hi TomBates,

Yup... sorry I used the wrong verbiage. I've seen it written as Maintenance Charge in other places but you're more correct than I am. I just can't seem to get to that function.

Bob

TomBates 01-23-2010 08:36 AM

RE: accucel 6 charger question
 
Hi Bob,
Look at the "Program Flow Chart" in the instruction manual. That will show thenecessary stepsto LiXX Storge,
Tom



ORIGINAL: N1EDM

Hi TomBates,

Yup... sorry I used the wrong verbiage. I've seen it written as Maintenance Charge in other places but you're more correct than I am. I just can't seem to get to that function.

Bob

860Crawler 01-28-2010 01:01 PM

RE: accucel 6 charger question
 


ORIGINAL: TomBates

It does both as long as you have both leads hooked up.

hmm, I was under the impression is only charges in charge mode even if both leads are attached and balance/charges when set to balance mode.

keredg 01-31-2010 12:49 PM

RE: accucel 6 charger question
 
Just as matter of interest i see the accucel 6 is on offer at   $29.99, think i'll get a spare

tph1 02-10-2010 05:12 PM

RE: accucel 6 charger question
 
anyone have a pic of the correct hook up of battery and charger( the one in the instruction manual is cut off on one side)? I just got mine and I'm new to E flight and don't want to fry a new pack. I ordered Rhino's with it and I don't think it came with the correct lead for them.
thanks for any help, especially a pic

TomBates 02-10-2010 05:51 PM

RE: accucel 6 charger question
 
Go to Hobby King, they have them on sale for $19.99.

ORIGINAL: keredg

Just as matter of interest i see the accucel 6 is on offer at $29.99, think i'll get a spare


faulknej 02-10-2010 06:24 PM

RE: accucel 6 charger question
 


ORIGINAL: N1EDM

In regards to the Accucel 6, I always have a problem trying to find the 'maintenance charge' screen. Does anyone else have problems like that?? I just can't seem to 'get there from here'.

Bob
Press:

Program select/LiPo Batt - enter - ++++ = LiPo Storage

tacx 02-10-2010 07:15 PM

RE: accucel 6 charger question
 
1 Attachment(s)
TPH1,
Do you have an Accucel 6 and trying to hook up a LIPO battery? If so, you have to connect the charge pigtail, from the batt., to the banana jacks on the side of the charger. The charge pigtail is the one with the larger wires. You may have to make or buy an adapter to go from the banana jacks to what ever type of plug you have on your batts. charge pigtail. The other pigtail, from the batt., with the small wires, should have a small white plug which is for plugging into the balancing ports next to the banana jacks. Depending on the number of cells your batt. has will determine which charge port to plug into. Here is a photo of what it looks like.

tph1 02-10-2010 07:22 PM

RE: accucel 6 charger question
 
yes it is a 6 and yes on the LiPo's, is the jack on the left side that looks like a round plug go to the 12v battery? Also, I get it on the balancing jack but do I need to buy 2 bullets and make a commector for the 10ga wires also?

tacx 02-10-2010 07:23 PM

RE: accucel 6 charger question
 
I just edited my first responce with a photo. Yes the round jack on the left side of your charger is for your 12 volt input. Yes you need to have a adapter pigtail with banana jaks on one side and your batt type plug on the other end. Do you have a manual??

tph1 02-10-2010 07:39 PM

RE: accucel 6 charger question
 
It didn't come with one but I downloaded the online one. It has the pic cut off on the right side so it was a little unclear.
thanks for your help

keredg 02-11-2010 10:53 AM

RE: accucel 6 charger question
 


ORIGINAL: TomBates

Go to Hobby King, they have them on sale for $19.99.

ORIGINAL: keredg

Just as matter of interest i see the accucel 6 is on offer at $29.99, think i'll get a spare


Thats where i got mine and saw the price, now $24.99, can't see it at $19.99 though


TomBates 02-11-2010 11:00 AM

RE: accucel 6 charger question
 
I have to agree, I don't see it now either. Someone pointed it out the other day and it was on their home page but I don't see it now. Looks like we both missed out on it.

Tom



ORIGINAL: keredg



ORIGINAL: TomBates

Go to Hobby King, they have them on sale for $19.99.

ORIGINAL: keredg

Just as matter of interest i see the accucel 6 is on offer at $29.99, think i'll get a spare


Thats where i got mine and saw the price, now $24.99, can't see it at $19.99 though



Henry Pel 02-11-2010 02:37 PM

RE: accucel 6 charger question
 
>quote:
>ORIGINAL: TomBates
>Go to Hobby King, they have them on sale for $19.99.
>quote:
>ORIGINAL: keredg
>Just as matter of interest i see the accucel 6 is on offer at $29.99, think i'll get a spare
>Thats where i got mine and saw the price, now $24.99, can't see it at $19.99 though

If you go to their site and order one of the Accell 6 50w chargers it prices at $24.99 with an instant account credit of $5.00

keredg 02-12-2010 12:51 PM

RE: accucel 6 charger question
 
Correct Henry, i saw that on the site after i posted my message

http://www.hobbycity.com/hobbycity/s...wsPageExec.asp


crashlander 02-12-2010 05:13 PM

RE: accucel 6 charger question
 
I just ordered an Acucel 6 and 2 Zippy 4S 1P -30 2650 LiPo batteries. Charger cost 24.99 and bat approx $35.00 each. Sounded pretty good price.
I am new to E-fliight and just received my Sequence F3A combo, Rimfire 32 motor and ECS. I'll be using Futaba FAAST rradio system.

tph1 02-14-2010 01:43 PM

RE: accucel 6 charger question
 
another dumb question, how do you know when they are finished? the manual doesn't say, does it just stop charging?
Tom

keredg 02-14-2010 01:51 PM

RE: accucel 6 charger question
 
It will beep and full will be displayed on the screen together with time and mah put in

tph1 02-14-2010 01:54 PM

RE: accucel 6 charger question
 
thanks


All times are GMT -8. The time now is 04:03 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.