HawkSky help by Dynam
 

<div id="post_message_18166986">I just received my first plane today, the Skyhawk by Dynam but I am having some issues.

1) When I plug the battery in, with the transmitter on, it makes a tune then just periodically beeps with no response to any command on the transmitter. ????

2) I noticed that the fuselage body isn't straight on, it looks like it's tilted a little to the left looking down the plane toward the nose. Almost like it's gradually bent that way.

Any help would be appreciated!
Thanks!</div>

RE: HawkSky help by Dynam
 

Ok, figured out the binding problem but not sure about the slight bend in the fuselage still.

RE: HawkSky help by Dynam
 

The fuselage should be straight.

Maybe some heat can reshape the foam, I am not sure.

If not too severe, the bend can be compensated with rudder in flight.

RE: HawkSky help by Dynam
 

I was hoping that I could do that actually.I noticed something else, does anyone know if the transmitter that comes with this can be attached to a computer and used with a flight sim? I noticed it as a different port on the on side of it.

RE: HawkSky help by Dynam
 

Could you post a picture of the transmitter or give us a link to any related advertisement?

RE: HawkSky help by Dynam
 

hyrulejedi86

Knowing the manufacturer of the transmitter as well as the model will certainly help us with answering the question.

CGr.

RE: HawkSky help by Dynam
 

Sorry, I thought it was the only transmitter that dynam had that came with their 4ch products. I was hoping someone might have used it before but here is he only link I could find with some info on it:

http://www.dynam-rc.com/products/transmitter/4ch.htm</p>