RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Beginners (https://www.rcuniverse.com/forum/beginners-85/)
-   -   Omega fuel question (https://www.rcuniverse.com/forum/beginners-85/10798157-omega-fuel-question.html)

mach2 11-05-2011 11:47 AM

Omega fuel question
 
okay, yet another fuel question.

the guy at the hobby shop gave me omega (castor/synthetic blend...pink stuff) fuel for my GP42 motor.

i cant find any real info on what's in it. The only info on the label says that it contains methanol, nitromethane and a non petroleum lubricants, but gives no percentages. It says 10% on it, but that's it. Is that amount of nitro that's in it?

there is not info on the bottle or on their website to show how much castor oil is in the fuel. i just wanna make sure that its got the manufacture's minimum requirement of 20% castor....

thanks guys!

landeck 11-05-2011 12:11 PM

RE: Omega fuel question
 
The 10% is nitro. Omega has a combination of castor and syn oil making up 17% of the total volume of the fuel. I use 10% Omega in all of my .25 through 1.20 2 and 4 stroke engines. It is a good reliable glow fuel.

Bruce

piper_chuck 11-05-2011 12:14 PM

RE: Omega fuel question
 
I've used Omega for years in my airplane engines. If it didn't give me good results, Iwouldn't have run it for years. http://www.rcuniverse.com/forum/js/f...wink_smile.gif

mach2 11-05-2011 12:24 PM

RE: Omega fuel question
 
cool. thanks fellas!

after running a synthetic in the motor, is it possible to run anything that is simply methanol and castor without the sythetic?

because i know that after running synthetic oil in a car motor, the residue left by the synthetic oil, will keep the conventional from lubricating correctly.



landeck 11-05-2011 12:28 PM

RE: Omega fuel question
 
Yes.

Bruce

carrellh 11-05-2011 02:22 PM

RE: Omega fuel question
 
Morgan Fuels (Omega, Cool Power, etc) started rebuilding their web site quite a while back and all they've managed to do is make a link to Facebook. I'm not sure how that is considered 'progress' but I'm sure it is.

The old site had all of the percentages so you knew what you were getting. As others wrote, total oil is 17%. The ratio is 70/30 synthetic to castor so you have 11.9% synthetic and 5.1% castor.

I've used Omega, Cool Power, Wildcat, Power Master, Ritchs Brew, and Magnum. All seem to run the same and they all keep the engines lubricated.

RCVFR 11-05-2011 02:33 PM

RE: Omega fuel question
 


ORIGINAL: mach2

okay, yet another fuel question.

the guy at the hobby shop gave me omega (castor/synthetic blend...pink stuff) fuel for my GP42 motor.

i cant find any real info on what's in it. The only info on the label says that it contains methanol, nitromethane and a non petroleum lubricants, but gives no percentages. It says 10% on it, but that's it. Is that amount of nitro that's in it?

there is not info on the bottle or on their website to show how much castor oil is in the fuel. i just wanna make sure that its got the manufacture's minimum requirement of 20% castor....

thanks guys!

The Hobby Shop guy did good by you. Your engine is a bushing bearing type, and fuel containing castor oil is best for it. 10% nitro is a good choice, he did not take advantage of you by recommending higher (more expensive) nitro. You have a good engine with the right fuel for it.

Happy landings.


378 11-05-2011 03:10 PM

RE: Omega fuel question
 

ORIGINAL: mach2

cool. thanks fellas!

after running a synthetic in the motor, is it possible to run anything that is simply methanol and castor without the sythetic?
Yup. Engine won't care as far as lubrication goes. You may need to re-shim, retune and install a different heat range glow plug going to 0% nitro fuel though.


because i know that after running synthetic oil in a car motor, the residue left by the synthetic oil, will keep the conventional from lubricating correctly.

This is incorrect. Putting conventional in a car that's lived on synthetic won't harm a damn thing. The conventional will lubricate just fine, up to it's own natural limits. The issue arises when you take a car that's lived a long life on conventional and stuff synthetic in it. Conventional motor oil leaves deposits and residue on the engine internals, and on a high mileage(150K+) motor this residue is often all that's keeping the main seals from leaking. Put synthetic in it and the detergents in that oil that clean out the oil goo that's keeping the motor sealed.

This same thing will happen with a glow engine as well. The castor oil does the same thing as the conventional oil in a car engine. Run an engine on a castor-heavy fuel mix for a couple of gallons and pull the backplate off. You'll see castor goo everywhere. Run a gallon of synthetic-only fuel through it and that castor goo will get flushed right out, and if that engine is old enough it will start leaking oil out the front bearing. Luckily you can seal it back up by just feeding it castor-heavy fuel again, eventually the goo will build back up and it will stop leaking.

mach2 11-05-2011 03:39 PM

RE: Omega fuel question
 
thanks for all the info guys!!!!

cutaway 11-06-2011 08:18 PM

RE: Omega fuel question
 

ORIGINAL: mach2
...is it possible to run anything that is simply methanol and castor without the sythetic?
FWIW, OS's manual that comes with the LA series engines recommends a 20% all castor oil fuel with 5-15% nitro. As a practical matter, the larger LA's run fine and produce decent power with 0% nitro although they do produce noticeably more power with 5%.

I have a LA .46 that was always run with an OS spec fuel I mix myself, and its still got a ferocious ABC "pinch" at TDC even after about 5 hours of running.

For his whole life, Duke Fox was a proponent of castor oil for his engines, and they'd last for many hundreds of hours when fed what he said to feed them.


All times are GMT -8. The time now is 05:32 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.