plane engine
 

Hello to all,
My name is paulino and i live in Portugal, i bought a 1978 Raduga 7M russian combustion engine. It starts and work well but when i take of the pype for the glow plug the engine stops, they told me to close a litlle the combustion screw but i didn´t help, the engine stops when i take of the energy for the glow plug, what can be the problem?Can anybody tell me whatcould bethe problem, Best regards for all,
Paulino Alves [email protected]

RE: plane engine
 

Sounds like the glow plug might be bad. Could be your adjustments are off some. ENJOY !!! RED

RE: plane engine
 

Hi Red,
Later i´m going to post the photo of the engine. Regards, Paulino

RE: plane engine
 

Yes definately start out with a new glow plug even if it glows when you connect it. The engine is a 1978 so the glow plug could be anything and they can have lost all their precious metal plateing long ago which will cause your problem even if it still glows.

John

RE: plane engine
 

Would that engine take a "standard" glow plug? (thread size, heat range, and so on?) Or is that engine an odd-ball thread size?

RE: plane engine
 

Hi everybody,
 Thanks for the information, i´m using a hot glow plug, Nº 1,  for the engine, could it be any coal in the top of the piston? Regards. Paulino

p.s. sorry for my poor english

RE: plane engine
 

Paulino if the glow plug was not new installed by you and has an unknown history then the first thing I would do is replace it with a new one.

John

RE: plane engine
 

Hello to all,
as soon as possible i´m going to post the photo of the engine.
Regards to all, Paulino