RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Beginners (https://www.rcuniverse.com/forum/beginners-85/)
-   -   Wingo (https://www.rcuniverse.com/forum/beginners-85/1773522-wingo.html)

bryris 04-30-2004 08:32 AM

Wingo
 
Tell me what you think about the wingo? Is it a nice and stable flyer?

Yub, yub, cmdr! 04-30-2004 09:09 AM

RE: Wingo
 
Alex Hilton will be able to help you.

I'm not sure, but he flew the plane and CRASHED every flight. He was using a Hitec Laser 4 FM with (I think) Feather reciever and servoes. He messed up in flying in a soccer field. The sad thing is that he flies in Sunapee NH, a resort, so it is fairly likely there is a flying field nearby.

He broke the tail boom and his dad deemed it unreparable. He never flies anymore but he paid $350 for the whole thing.

Talk about not having an instructor.

Montague 04-30-2004 09:50 AM

RE: Wingo
 
I've never flown a Wingo, but I've seen several at the field, they seem to fly pretty well.

FHHuber 04-30-2004 12:59 PM

RE: Wingo
 
wingo is a neat little bird.[8D]

Very stable. Very durrable (except you can smash the front chin of the fuselage relatively easilly... that's why they now cme with a "chin guard" )

It can't handle much wind... too low a maximum airspeed.

They are nice introductory airplanes.

There is no such thing as crashing a Wingo and making it irreparable without putting it through a wood chipper. The things are darn near bulletproof.
The boom can be pulled and replaced... with a common dowel if nothing else is handy. A snapped wing can be glued back with some of the new polyurethane glue, and taped in place and the next day its good as new. Clear packing tape and 5 min epoxy can fix almost anything that happens to them too.

They get a bit hard to fly when you have doubled the airframe weght with all the glue and tape... But a bigger electric motor can cure that. (Radio Shack sells one that works nicely for about $5. I forgot the part number...) Yuo don't wear a Wingo out... you get tired of flying it.


All times are GMT -8. The time now is 08:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.