RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Beginners (https://www.rcuniverse.com/forum/beginners-85/)
-   -   Futaba and OS Engines? (https://www.rcuniverse.com/forum/beginners-85/1877248-futaba-os-engines.html)

RichD 06-06-2004 09:58 AM

Futaba and OS Engines?
 
Today, while surfing around on Futaba's website, they have OS Engines under thier products. Does Futaba own OS?

finfan 06-06-2004 06:29 PM

RE: Futaba and OS Engines?
 
I saw the same thing last night, was curious about it too.

Tim

MikeL 06-06-2004 08:14 PM

RE: Futaba and OS Engines?
 
When you hear people talk about "the Empire" here, they're not talking about Star Wars. They're talking about Great Planes/Hobbico/Tower Hobbies which controls the importation and distribution of an incredibly wide variety of hobby goods into the US.

jboy381-RCU 06-06-2004 08:50 PM

RE: Futaba and OS Engines?
 
may the force be with you :D:):D


john

nbcguy 06-07-2004 01:30 PM

RE: Futaba and OS Engines?
 
I myself, have noticed that there are a heck of a lot of R/C companies located in Champaign, Illinois. But to be honest, I could care less, because "Thank God" for this hobby.

prebres 06-07-2004 02:01 PM

RE: Futaba and OS Engines?
 
there are two major players in this hobby great planes/hobbico/tower and horizon/hanger9/jr

each has it's own ups and downs. i love futaba radio gear, but i really like jr servos

So I fly a lot of hanger 9 stuff that i get from a horizon distributer with a futaba radio and an OS engine.

RichD 06-07-2004 02:13 PM

RE: Futaba and OS Engines?
 
I guess my question wasnt fully understood. This has nothing to do with horizon, towerhobbies, great planes, hobbico, jr, or hanger9.

I was on the [link=http://futaba.com]FUTABA[/link] website, and under THIER [link=http://futaba.com/products/hrc/products/index.asp]products[/link], they list OS Engines.

Does futaba own OS Engines?

jboy381-RCU 06-07-2004 03:09 PM

RE: Futaba and OS Engines?
 

ORIGINAL: prebres
i love futaba radio gear, but i really like jr servos


you do know that you can use JR servos with a futaba receiver...i do it all the time with no problems...if you use futaba servos with a JR receiver you have to sand off the lip on the side of the servo connector...they are set up the same pos,neg,sig...

i hope this helps you:)
john

Montague 06-07-2004 05:52 PM

RE: Futaba and OS Engines?
 
www.Futaba.com is copyright Futaba Corp of America. The OS site it links to is the U.S. website for OS, copyright Hobico.

So, while I'm pretty sure that OS and Futaba are actually different companies with neither owning the other, they are REALLY close marking wise, and both part of the Hobico "family" of companies. So anything you see marked "Futaba" or "OS" in the US is going to be coming from the empire, not direct from Futaba or OS. Including their web sites.

Jim Schwagle 06-07-2004 08:55 PM

RE: Futaba and OS Engines?
 
I believe Futaba owns OS. I seem to remember something a few years ago announcing the purchase.

CrashBurn69 06-07-2004 09:33 PM

RE: Futaba and OS Engines?
 
Ask Bax, he could tell you.

prebres 06-08-2004 07:05 AM

RE: Futaba and OS Engines?
 
been a lip sander for years!:D

phread59 06-08-2004 07:02 PM

RE: Futaba and OS Engines?
 
I believe that Jim is right. I seem to remember that OS was sold a few years back. The original founder wanted to retire as I remember. And I am almost certain Futaba bought the company. My memory is a little hazy on this. I do not use OS engines. But I do own and use Futaba radio's.

Mark Shuman

Yub, yub, cmdr! 06-09-2004 06:29 AM

RE: Futaba and OS Engines?
 
Futaba, O.S., Hobbico, Great Planes, Super Tigre, Kontronik, and Kyosho are all named under Best RC, www.bestrc.com

Most likely there's an "overlord" corporation managing all those subbrands. That overlord might be BestRC.

I think Horizon is the overlord corp. for JR, Hangar 9, and Seagull.

ZimboRaider 06-09-2004 02:53 PM

RE: Futaba and OS Engines?
 
I thought Hobbico owned or imported all of Tower Hobbies brands.

Although, just to throw into the arguement I think Ripmax is also a big player!:D
Zimbo

RichD 06-09-2004 04:32 PM

RE: Futaba and OS Engines?
 
I personally dont think Futaba is owned by any "Hobby type RC" company. "Hobby RC" is a VERY small portion of thier company.

We used futaba controls a lot with the automation and controls of industrial machines.

photoniq 06-09-2004 05:40 PM

RE: Futaba and OS Engines?
 
Futaba do own OS. The hobby industry is a strange one. In the UK Irvine manufacture their own engines but they are also the exclusive distributor of OS engines and Sanwa radio gear (not futaba) :) Go figure...

Yub, yub, cmdr! 06-11-2004 06:17 AM

RE: Futaba and OS Engines?
 
I think we should be Commies and get some AK47's and blow up the hobby monopolies! :D

I'm just kidding, but I always get a feeling that there's a cold war going on between the monopolies.... also, the "exclusive distributor" thing is really getting on my nerves. Why the heck can't we just sell the frickin things wherever we want?


All times are GMT -8. The time now is 05:13 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.